-
ABOUT USGao Lei (Hebei) Welding Material Co., Ltd. is a large-scale backbone enterprise specializing in R & D and production of welding materials. With a history of 30 years, the factory covers an area of more than 30 acres. Sophisticated equipment, sophisticated technology.
-
ProductsAt present, the main products, tungsten carbide wear-resistant flux-cored wire, tungsten carbide alloy wear-resistant electrode, high, medium and low end. Hardness of surfacing layer: HRC50-----88, free choice for customers. Can be customized according to customer requirements!
-
NewsHigh base welding materials, uphold the "quality-oriented, innovation as the soul" business philosophy. We are convinced that high-quality welding products are the cornerstone of a solid connection and a lasting project.
-
ApplicationsThe needs of customers are endless. We have won the respect of the market and customers with the service concept of full service, touching customers, sincere and eternal service, sincere service, attentive service and long-term service.
Flux cored wire Coping Guide Solving Common Problems in Welding
Release time:
2024-09-03
In welding work, the use of flux cored wire is a common and efficient method. However, many people may encounter some problems when using flux cored wire. This article will introduce you to some common problems and solutions to help you better meet the challenges in welding.
In welding, flux cored wire is a fan-type welding wire that can be used for filler welding or weld filling. However, there may be some problems with flux cored wire. Here are some common problems and solutions
1. Slag splashing during welding: Sometimes slag splashing may occur during welding, which may be caused by too fast welding speed or too high current. The solution is to reduce the welding speed or adjust the current parameters.
2. The welding connection part is not fully melted: If the welding connection part is not fully melted, the quality of the weld may be reduced. At this time, it is necessary to appropriately increase the welding current or welding time to ensure that the weld is fully melted.
3. Welding produces pores: Porosity is one of the common defects in welding, and sometimes it may be caused by the unclean welding area or the oxidation of the weld. Ensuring that the welding area is clean and taking appropriate protective measures can effectively prevent the occurrence of pores.
By understanding these common problems and adopting corresponding solutions, you can better master the skills of using flux cored wire and improve welding quality and efficiency. May the guide in this article help you achieve better results in your welding work.
1. Slag splashing during welding: Sometimes slag splashing may occur during welding, which may be caused by too fast welding speed or too high current. The solution is to reduce the welding speed or adjust the current parameters.
2. The welding connection part is not fully melted: If the welding connection part is not fully melted, the quality of the weld may be reduced. At this time, it is necessary to appropriately increase the welding current or welding time to ensure that the weld is fully melted.
3. Welding produces pores: Porosity is one of the common defects in welding, and sometimes it may be caused by the unclean welding area or the oxidation of the weld. Ensuring that the welding area is clean and taking appropriate protective measures can effectively prevent the occurrence of pores.
By understanding these common problems and adopting corresponding solutions, you can better master the skills of using flux cored wire and improve welding quality and efficiency. May the guide in this article help you achieve better results in your welding work.
Key words:
Share
Contact Information
Mobile : +86 18632090039 (Mr.Wang)
Mobile : +86 13930980503
Mailbox : sales@gaoleihancai.com
Address : No.26 Fuqiang Street, Lutou Collective
Economic Reform and Development Experimental
Zone, Nangong City, Hebei Province
